Product Showcase

Multistage pumps

Wilo USA announces the release of extended range versions of the Wilo Helix V high-efficiency multistage pump line. The Helix V is a non-self-priming, high-pressure, vertical multistage centrifugal pump with inline connections and is suitable for a wide range of applications including water supply and pressure boosting, industrial circulation systems, washing systems and irrigation. The pump is available immediately in 6” and 8” and boasts full 304 stainless-steel construction, a premium efficient NEMA motor, cartridge seal for easy replacement and repair, and improved hydraulic performance.

Wilo USA

www.wilo-usa.com

Coal tar epoxies

The Denso® North America line of self-priming, spray-applied coal tar epoxies and a coal tar epoxy alternative is used for the long-term protection of steel and concrete substrates against water, wastewater, seawater, alkaline water and acidic water corrosion. These high-build, two-part epoxies are designed to work in conjunction with cathodic protection to prevent corrosion of steel piles, sheet piles, lock gates, reservoirs, non-potable water pipelines, treatment/storage tanks, bridges and other aggressive applications.

Denso North America

www.densona.com

Twin shaft grinder

NETZSCH Pumps North America’s N.Mac™ Twin Shaft Grinder is designed to protect pumps and processes. The N.Mac is designed to fragment a variety of materials and is suitable for wastewater treatment, biogas and biomass plants, food, animal processing, and other waste and industrial applications. Available in both channel and inline (flanged) housing construction, the N.Mac can be installed into effluent channels or upstream from a pump. Featuring cartridge cutting knives for quick and simple replacement and servicing, the N.Mac offers quenched lubricated mechanical seals for dry running capability. The mechanical seal cartridge design enables quick and simple replacement and servicing.

NETZSCH Pumps North America

www.netzsch.com/us

No-contact coupling

Ford Meter Box’s No-­Contact Lead-Pak Coupling (patent pending) is designed for connecting existing lead plumbing lines to other service line materials. The coupling prevents direct contact of the lead plumbing line with other metallic water system components. This design mitigates the possibility of galvanic corrosion.

Ford Meter Box

www.fordmeterbox.com

Granular activated carbon

Cabot Corporation’s HYDRODARCO® 4000 and NORIT® GAC 400 are granular activated carbons (GAC) for the removal of poly- and perfluoroalkyl substances (PFAs) including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) in public water systems. Unlike other types of activated carbon, these have optimized pore size distributions that provide a large quantity of adsorption sites for PFOA and PFOS removal. These products resist interference from natural organic matter that can cause partial or complete blockage of the activated carbon pore structure, leading to reduced adsorptive capacity for target contaminants including PFOA and PFOS.

Cabot Corporation

www.cabotcorp.com

Super-fine screen

The OR-TEC Blue Whale Micro Bar Screen effectively screens to 2.0 mm to remove approximately three times the volume of rags, wipes, hair and other stringy material in wastewater, thereby eliminating downstream matting. It is self-cleaning, requires zero wash water or brushes and is guaranteed not to blind. The Micro Bar Screen uses a parallel array of wedge-sectioned bars (not wedge-wire) with even spaces to form the screen face. Wedge-sectioned screen bars have only 2 contact points on which material can block, as the path from the screen face to the back of the screen is gradually enlarged.

OR-TEC

www.or-tec.com