Orthophosphate analyzer

The Liquiline System CA80PH is an orthophosphate analyzer for monitoring water treatment processes. The CA80PH is available in four measuring ranges, two using the standard molybdenum method (blue method; DIN EN 1189) for low range measurement down to 50 μg/L and two using the molybdate vanadate method (yellow method) for high range measurements up to 50 mg/L. Samples and analyses can be taken as often as necessary. A typical sample analysis takes 8-11 minutes depending on the method used. The analyzer automatically obtains a water sample from the process, filters it, adds the reagent, measures the intensity, and then cleans the sampling system with compressed air or water in preparation for the next test.

Endress+Hauser

www.us.endress.com