Pipe stoppers range widened

Huntingdon Fusion Technique Ltd., Pipestoppers™ design group recently introduced changes to its popular aluminium expanding Mechanical Pipe Plugs, which now means that the range extends from 1.5” to an increased size of 36”. The range from 1.5” to 5” is available in 1/2-inch sizes, from 6” to 10” in 1-inch sizes and 12” to 36” in a range of 1-inch to 2-inch variations covering all standard pipe diameters. A major benefit of aluminium plugs is higher heat tolerance over the nylon range, obviating the risk of material softening, leading to potential loss of seal. An additional advantage, particularly in larger sizes, is that the aluminium plugs are considerably lighter than their steel counterparts.

Huntingdon Fusion Techniques Ltd. - Pipestoppers™ Division
Burry Port, Carmarthenshire, UK
www.pipestoppers.net
Enquiry No. 206

---

AWWA spotlights leak detection

The R900® Permalog, a combination leak noise logger and radio meter interface unit (MIU), from water leak detection specialist Fluid Conservation Systems (FCS) and metering specialist Neptune Technology Group was chosen by the American Water Works Association to be featured at the New Product Technology Showcase at the 2008 AWWA Annual Conference & Exposition (ACE) in Atlanta, USA, in June. The R900 Permalog uses an FCS leak noise logger and a Neptune R900 radio frequency meter interface unit to provide utilities with distribution-side leak monitoring capabilities in their automatic meter reading system.

Fluid Conservation Systems Inc., A Division of Halma Water Management
Milford, Ohio, USA
www.fluidconservation.com
Enquiry No. 207

---

Tube and pipe bending made easy

Tubela Engineering Co Ltd. is now the sole importer of the JD Squared Inc. Model 3 Tube and Pipe Bender, designed for professional fabricators. Since 1945, Tubela has been manufacturing, importing and exporting a range of tube, pipe, square section, bar bending machines and slate cutters. As well as providing a full manipulation service to those companies who may not wish to immediately purchase a tube bending machine themselves. Whether the requirement is for small batch or much larger quantities, Tubela is able to offer the same service from a small swerve up to full curve. Used in a multiplicity of applications including general engineering, electrical engineering, maintenance, plumbing, fabrication, custom cars, racing cars, beach buggies and much more, these powerful machines have proved to be tough, long lasting and efficient.

Tubela Engineering Co. Ltd.
Great Dunmow, Essex, UK
www.tubela.com
Enquiry No. 208