MYCELX Technologies' Abbott to present at ILTA 2002

May 28, 2002
Kirk Abbott, director of engineering with MYCELX Technologies Corporation, will address advances in oil and hydrocarbon removal technology at the ILTA 2002 conference on June 10 in Houston, Texas.


GAINESVILLE, Ga., May 28, 2002 -- Kirk Abbott, director of engineering with MYCELX Technologies Corporation, will address advances in oil and hydrocarbon removal technology at the ILTA 2002 conference on June 10 in Houston, Texas.

Abbott's presentation is based on the paper New Technology for In-Process Treatment & Discharge of Tank Bottoms & Tank Farm Run-Off, which he co-authored with Hal Alper, president of MYCELX Technologies.

Abbott will discuss the salient properties of curable polymeric surfactant (CPS) infused filters, which remove residual organics in a single-pass at high flow rates without desorption or significant pressure drop. Tank bottoms and tank farm run-off are often a complex mix of oils, fuel and other organic compounds in various stages of emulsification.

Typical waste stream treatments, such as gravity separation devices (Oil Water Separator), coagulation/flocculation and dissolved air-flotation with additional de-watering and sludge treatment, often are not sufficient to reduce the total petroleum hydrocarbons (TPH).

"The use of CPS infused filters to remove residual organics from process streams can significantly reduce the overall per gallon cost to treat and dispose the impacted water," Abbott said.

Field costs and cost savings will be presented and discussed for waste streams containing benzene, toluene, ethylbenzene and xlyenes (BTEX), polychlorinated biphenyl (PCBs), chlorinated solvents, polyaromatic hydrocarbons (PAHs), methyl tertiary butyl ether (MTBE), gasoline and crude oil.

Additional information about CPS infused filters can also be obtained at the company's website at www.mycelx.com.

Sponsored Recommendations

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Rising Cyber Threats and the Impact on Risk and Resiliency Operations

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

SmartSights WIN-911 Alarm Notification Software Enables Faster Response

March 15, 2024
Alarm notification software enables faster response for customers, keeping production on track